Laboratory Sample Pulverizer
Laboratory sealed sample pulverizer / lab sample grinder / lab sample grinding mill is a small lab grinding machine for grinding the ore/material samples into powder, which has been widely used in the laboratory of the geology, mining, metallurgy, coal, power, chemistry and building industries, for the none pollution sample testing.
The sealed pulveriser gets an "automatic dust proof" and a "pot anti-loose" device, which provide the machine advantages of low noise, no dust, and easy operation.
The machine adapt high frequency vibrating grinding method to make the power fine and event, no need screening and shrinking, prevent sample mixing.
This machine gets a simple structure, nice outlook , small volume, with a high efficiency, the output material is fine and evenly, which could meet the demand of education
and research department. no need install and adjusting. Could be used in any location, it's one of the best sampling machines for laboratory use.
Features
1. High efficient no need screening again, the output material could be used for testing directly.
2. Digital timing screen, special designed high quality motor, with long service life.
3. With shock-absorbing stand.
4. Sealed grinding pot, dust proof, no pollution.
5. Low noise, smooth operating, complete sealed machine, with high safety operation standard.
6. High standard sealing design, no leaking for dry or wet method grinding.
7. Reliable, evenly output size, short grinding time.
8. Simple and reasonable structure, good out look, easy to operate, maintenance, and clean.
Technical Parameter
| model |
feeding size(mm) |
weight of charge(g) |
discharge granularity(mesh) |
grinding time(min) |
motor power(kw) |
total weight(kg) |
overall size(mm) |
| GJ-IW |
<12 |
100 |
120-200 |
1-3 |
1.1 |
160 |
640*560*745 |
| 2MZ-100W |
<12 |
200 |
120-200 |
2-4 |
1.5 |
230 |
800*740*950 |
| 3MZ-100W |
<12 |
300 |
120-200 |
2-4 |
1.5 |
260 |
800*740*950 |
| 4MZ-100W |
<12 |
400 |
120-200 |
2-4 |
1.5 |
260 |
800*740*950 |
Working Principle
working principle is vibration milling type, materials feed into the pot, high speed spinning crushingring and hammer will grind the material ready within 1-5 minutes.The input materials should be brittle, and dry, out put size is between 80-200 mesh, if require even finer size, the machine can be designed according special requirement.
Detailed Images
Packaging & Shipping
Company Information
Victor is a large mineral processing manufacturer for 15 years history, with covering an area of 48,000 square meters and 20,000 square meters for workshop, with various large modernized machinery facilities, professional R&D team and installation team.
With 32% market share in China and the rest to overseas, already successfully exported to over 50 countries, such as USA, England, Australia, Brazil, Turkey, Italy, Russia, South Africa, Zimbabwe, Sudan, Ghana, Congo, Morocco, India,Indonesia, Malaysia, Philippines, North Korea, Mongolia, Vietnam, Thailand etc.
Our goal is to provide one-stop service for you and assist you to solve all problems from investment to his return in the field of mining, including the preliminary mineral analysis, mineral processing test, engineering design, equipment debugging and technical training etc..
We are expert especially at mining separating and lab mining plant, main products as below:
Gold trommel wash plant
Shaking table
Spiral chute separator
Centrifugal gold concentrator
Jig separator machines
Waste recycling machine
Grinding and mill crusher
Flotation cell machine
Magnetic separator
Laboratory mining plant
Contact Us
Matthews Lai
Jiangxi Victor International Mining Equipment Co.,Ltd
(eight six one three three six one seven seven nine zero one two)
){kind=link}
){kind=link}