Small Scale Capacity 5tph Rock Gold Mining Plant for Sale

• Customization: Available
• Type: Gravity Separator
• Voltage: 380V
• Model NO.: Rock Gold Plant
• Weight: 8T
• Material: Stainless Steel
• Energy Saving: Energy Saving
• Warranty: 1 Year
• Customized: Customized
• Condition: New
• After-sales Service: 1 Year
• Product Name: Rock Gold Plant
• Transport Package: Nude Package
• Specification: Depends on model
• Trademark: WKD
• Origin: China
• HS Code: 8474100000
• Production Capacity: 500 Sets/Month
• Package Size: 91.00cm * 75.00cm * 99.00cm
• Package Gross Weight: 1200.000kg

Product Description

Introduction

 

Gravity gold processing is the most traditional method of extracting gold in rock gold mine used widely. It is more as a secondary process to recover coarse gold in the grinding circuit to create favorable conditions for the flotation and cyanidation. Because of its efficiency in capturing single coarse gold, so for placer gold extraction, the process is also in dominant position

 

5-20THP rock gold processing plant .

1:at first use jaw crusher as rough crusher.
2:then to the secondary jaw crusher as fine crushing 3:ball mill for grinding,ball mill and spiral classifier be close circuit grinding.
4:overflow to spiral concentrator(or centrifugal concentrator) for rough separation.
5:The concentrate of spiral concentrator(or centrifugal concentrator) to shaking table,the tailing of spiral concentrator to centrifugal concentrator for recovery fine gold.

Model	inlet size (mm)	inlet size (mm)	Power (kw)	weight (t)	size (mm)
PE150*250	150*250	1-3	5.5	0.8	720*600*850
PE200*300	200*300	2-6	7.5	1.2	910*750*990
PE200*350	200*350	3-10	11	1.5	910*750*990
PE250*400	250*400	5-20	15	2.8	910*750*990
PE400*600	400*600	30-80	30	6.5	1730*1730*1630
PE500*750	500*750	40-110	55	12	1980*20801870
Please contact us for more models, customized also available

Similar Products

Widely Used Rock Gold Solution 1:

Hard-Rock Gold Mining Use Jaw Crusher + Hammer Crusher + Shaking Tables
1. Jaw Crusher as the primary crusher and Hammer Crusher as the secondary crusher to crusher gold rocks to get sized fine ore for further processing.

2 It is configured with trough feeder to give materials to a jaw crusher, after jaw crusher grind materials
size to be small to hammer crusher .hammer crusher grind materials to be fine then to shaking table to recover gold.
3. The trough feeder it can feed evenly to the crusher.
4. The jaw crusher Preliminary crushing of large stones also can be made mobile type as per request.
5. The hammer crusher the output size is adjustable like 10mm,5mm, etc. for this project it's grind materials to 0-2mm. also can be made mobile type as per request.
6. The shaking table is gravity to recovery gold .with very high recovery rate and It is very friendly to the environment
7. This Plant also can be used for Hard Rock Tin ore/ Coltan ore/ Tungsten Ore/ Chrome
8. The capacity for this process plant can be customized as per request such as 10tph, 20tph,50tph,100tph, etc

Widely Used Rock Gold Solution 2:

Hard-Rock Gold Mining Via Ball Mill + Shaking Tables
1. Loader or Excavator feed raw ore into the hopper;

2. Vibrating feeder feed primary jaw crusher; primary jaw crusher is to crush big stone to medium size.
3. Output of primary crusher sent to fine jaw crusher by belt conveyor; fine jaw crusher is to crush medium sized stone to small size.
4. Output of fine jaw crusher sent to vibrating screen by belt conveyor;
5. Oversized rock is back to fine jaw crusher for further crushing by belt conveyor;
6. Undersized materials sent to one transit ore bin by belt conveyor;
7. Fine ore in transit bin is sent to ball mill via electromagnetic vibrating feeder+belt conveyor. ball mill is to grind ore to
powder size.
8. Discharge of ball mill goes to spiral classifier for roughly size separation. Coarse particles will be back to ball mill for
further grinding;

9. Fine particles will be sent to the centrifugal concentrator for concentrating fine gold by a slurry pump. 10.Tailings of centrifugal concentrator go to sluice box for recovering more gold;
11. Concentrates of sluice box and centrifugal concentrator are sent to shaking table for fine concentrating gold. The ball mill + classifier forms a closed-circuit grinding system, which can achieve more than 90% of the discharge to 200 mesh(0.074mm) So this flowchart is very suitable for recovering fine powder gold in rocks.

Widely Used Rock Gold Solution 3:

Hard-Rock Gold Mining With Wet Pan Mill + Shaking Tables
1. hopper+vibration feeder: raw materials will feed into the hopper by truck or excavator as you want,then the materials will
feeded into the jaw crusher by the vibration feeder automatically.

2. jaw crusher: jaw crusher is uesd to crush the rock gold ore, different model of the jaw crusher is with different input size,discharge size and capacity.the model of the jaw crusher is chosed based on the ore size and the capacity you want to process,big ore size need big model and more cost.
3. belt conveyor: belt conveyor is used transport the discharge from the jaw crusher to the hopper,it works automatically, will save much manual work.and the length and width can be customized as you requested.
4. hopper+trough feeder: there are two functions of the hopper and trough feeder
a.make the feeding work to each machine more smoothly.when you feed the materials to the jaw crusher,it will takes some time to get the discharge,the machines behind the jaw crusher will work for nothing at that time,means waste power and release the capacity of the machines behind the jaw crusher.if you add the hopper and trough feeder, each machine can runs better.
b.used to stock the discharge from the jaw crusher.sometimes the ore size maybe big, you need to use a big jaw crusher with big capacity.but you just want to start with a small capacity,then you can add the hopper and trough feeder to stock the discharge from the jaw crusher, and you can chose the hammer crusher with a small capacity behind the jaw crusher,no need to match the capacity with the jaw crusher.when the hopper is full, you can stop the jaw crusher.will save more power.
5 .belt conveyor:belt conveyor is used transport the discharge from the hopper to the hammer crusher,it works automatically,will save much manual work.and the length and width can be customized as you requested.
6. hammer crusher: hammer crusher is used to small the discharge from the jaw crusher, because the feeding size of the wet pan mill is 0-25mm.the discharge from the jaw crusher hard to meet the needs of the wet pan mill. the hammer crusher can do work successfully, there is a sieve under the hammer crusher and the sieve size can be customized
as you want, minimum sieve size can be 2mm,the smaller size you feed into the wet pan mill, the more efficent work you will get.
7. wet pan mill: for the rock gold ore, sometimes the gold can be released under the size 0-2mm or 0-1mm or 0-200mesh.these output size will need different machines and also depends on the ore condition.if you need to grind the ore to 0-1mm, you may need the wet pan mill.
8. shaking table: the shaking table is used to get the gold concentrate from the raw materials.when you add the water and
materials to the shaking table, the gold will be separated from other stones and minerals which the gravity is lower
than the gold.
9. gold smelting furnace: the gold concentrate from the shaking table can be smelted to the gold bar by the gold
smelting furnace.will easy to carry the gold and in case of missing. Notes: the wet pan mill and shaking table will need water when works, you can also add water to the hammer crusher,in case blocking the sieve of the hammer crusher.the machines in the video are just for you reference, need to reconfirm based on the ore condition you provide..

Company Information

Victor is a large mineral processing manufacturer for 15 years history, with covering an area of 48,000 square meters and 20,000 square meters for workshop, with various large modernized machinery facilities, professional R&D team and installation team.

With 32% market share in China and the rest to overseas, already successfully exported to over 50 countries, such as USA, England, Australia, Brazil, Turkey, Italy, Russia, South Africa, Zimbabwe, Sudan, Ghana, Congo, Morocco, India,Indonesia, Malaysia, Philippines, North Korea, Mongolia, Vietnam, Thailand etc.

Our goal is to provide one-stop service for you and assist you to solve all problems from investment to his return in the field of mining, including the preliminary mineral analysis, mineral processing test, engineering design, equipment debugging and technical training etc..
We are expert especially at mining separating and lab mining plant, main products as below:













Package: FCL & LCL export standard container 20GP/40GP/40HQ.

FCL: main machinery gold shaking table in nude package and bulk in container, spare parts in wooden box or as your special requirement
LCL: machinery are packed in steel frame, base and deck are separately packed.

Shipping: by sea shipment, by air shipment or by courier express, it depends on you.

Payment Terms: T/T or L/C is preferable. T/T: 30% deposit and the balance before delivery

We will take photos for your products when finished and show you before delivery. Also keep you informed for any updated information including shipping before you receive it, to let you rest assured.

Delivery time: shipped in 15 days after payment


FAQ

1.How is the quality of your products? (mining equipment/machine)
Answer: Our products are manufactured strictly according to national and international standard, and we will take a test on every grinder before delivery.

2.Guaranteed?
Answer: All of our products are guaranteed for one year. If products quality is not consistent with the description as we
described or the promise before you place order, we promise 100% refund.

3.How about price?
Answer: For the complete same machine, we can promise our quality is the best when the price same as other competitors, and our price can be lowest when the quality at standard level.

4.Service and Payment Terms?
Answer: We can accept T/T and L/C; 30% deposit, 70% balance before delivery, which is international trade practice;Finished product pictures will provide to customers before delivery.


Our Service

1) Pre-sale service: Freely provide project designing, process designing, choosing suitable equipment for you.

2) Medium-sales service: Accompany you to complete the acceptance of the equipment, draft the construction scheme and detailed process, and complete process of export

3) After-sales service: Offer considerate technical guidance in installation, debugging and operators training. We are available at any time if you need.