| Customization: | Available |
|---|---|
| Type: | Bucket Sand Washer |
| Water Consumption: | 40-300t/h |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Introduction
Sand cleaning washer is commonly known as wheel-bucket type sand washer, and is high efficiency sand washing equipment developed and produced by Victor through adopting domestic and overseas advanced technologies and combining the actual situation of domestic aggregate industry, which shall be used with the sand maker. Sand cleaning washer is applied for washing applications in sand plant, mine, concrete batching plant, and industries like building materials production, transportation, chemistry, water conservancy, etc. Our sand cleaning washer is a highly efficient machine designed on the basis of the detailed washing needs in mining industry and comes with features like good washing effect, reasonable structure, large capacity, and less sand loss during
washing process. The transmission part of this mining washing machinery is isolated from water and sand, which could greatly reduce the error rate of the machine.
Sand cleaning washer drives the impeller in the water groove to move like a circle transmitted by electric motor and decelerator, and then mixes, overturns, cleans and discharges the sand or slag pellets in the water groove.
Features
1. Simple structure.
2. The bearing device of impeller drive is separated from water and materials with water, to avoid the damage of the bearing.
3. New sealing structure and reliable transmission device.
4. Reasonable structure.
5. High capacity, low power consumption.
6. Easy structure, stable operation
Working Principle
1. The electric motor runs slowly with the impellor after decelerated by the belt, decelerator and gears wheel.
2. The sand and stone flow into washing launder from feeding launder, rolls with the impellor, and grinds each other. The impurity covering the sand is washing away. At the same time, add more water, the strong water flow will take away waste and some
low-weight wastes from washing launder.
3. Through the above process, the washing function is finished. The clean sand and stone is lift up by vane. When it goes up slowly, the water begins to drop through the mesh and fall back in the washing launder.
4. On one hand, water is removed from the sand and stone; on the other hand, the water can be fully used. Finally, the sand and stone goes to the out launder from the rotary impellor to finish the washing task.
Technical Parameters
|
Model
|
XSD2610
|
XSD2816
|
XSD3016
|
|
Impeller size (mm)
|
φ2600×1000
|
φ2800×1600
|
φ3000×1600
|
|
Impeller rolling speed(r/min)
|
1.178
|
1.177
|
1.179
|
|
Capacity(t/h)
|
20-50
|
30-60
|
50-120
|
|
Max.feed size(mm)
|
≤10
|
≤10
|
≤10
|
|
Power (Kw)
|
5.5
|
7.5-11
|
15
|
|
Reducer model
|
ZQ50-50-I-Z
|
ZQ65-50-I-Z
|
ZQ65-50-I-Z
|
|
Overall dimension (mm)
|
3255×1982×2690
|
3540×3000×2880
|
3845×3000×3080
|
){kind=link}