PE250*400 PE600*900 Stone Crusher Plant Diesel Engine Mobile Rock Crushing 2-6tph Small Jaw Crusher

• Customization: Available
• Type: Jaw Crusher
• Motor Type: AC Motor
• Model NO.: pe400*600
• Application: Mine
• Materials: Limestone
• Outlet Size: 20-50mm
• Inlet Size: 250×400mm
• Condition: New
• Warranty: One Year
• After-sales Service: Engineer Support
• Capacity: 5-20t/H
• Maxing Feeding Size: 210mm
• Discharge Size: 20-60mm
• Weight: 2800kg
• Transport Package: No Package
• Specification: Depends on model
• Trademark: WKD
• Origin: China
• HS Code: 8474209000
• Production Capacity: 500 Sets/Month
• Package Size: 45.00cm * 45.00cm * 45.00cm
• Package Gross Weight: 45.000kg

Product Description

Introduction

Jaw Crusher is mainly applied for primary,medium,and fine crushing various kinds of ores and lump materials with max compression strength of no more than 320 Mpa in industries of metallurgy,mining,chemical,construction,highway,railway,waterworks,and so on.The max compression strength of the materials that will be crushed could be 2000kg/cm².It is not suitable to crush clay materials as the crushing cavity is easily clogged.

Details Images




Working Principle

The motor transmits through belt, drives the moving jaw to do periodic motion towards the fixed jaw by the eccentric shaft. The
angle between toggle plate and moving jaw plate increases when mobile jaw moving. So the mobile jaw moves towards the fixed jaw.
The stuff will be crushed in this process. The angle between toggle plate and moving jaw decreases when moving jaw moves down, the
moving jaw moves leaves fixed jaw by pulling rod and spring, the final crushed stuff will be discharged from the outlet.


Main Features
2. High crushing ratio, even output granularity;
3. High reliability, low investment;
4. Low noise, less dust.
5. Big capacity


Application
1) stone Jaw Crusher is widely used in the works of mine, smelting, building materials, road, railway,
irrigation,chemical industry etc.
2)The jaw crusher is applicable for the rough and medium crushing of rocks and ores with a compressive strength less than 320MPA.
It is the preferred equipment of secondary crushing.

Structure
The jaw crusher mainly consists of: fixed jaw, movable jaw, frame, upper and lower guards, Jaw crusher structure Adjustment seat, moving rod and other components. A good understanding of the internal structure of the jaw crusher can play a very good role in the use of the jaw crusher and when problems occur.



Technical parameter

Model (PE)	Inlet size (mm)	Max feeding size (mm)	Capacity (t/h)	Motor (kw)	Weight (t)	Dimension (L*W*H mm)
PE-150*250	150*250	125	1-5	5.5	0.8	950*1100*1100
PE-200*300	200*300	180	2-10	7.5	1.2	1400*900*1200
PE-250*400	250*400	210	4-15	15	2.8	1450*1350*1500
PE-400*600	400*600	350	5-22	30	7	1700*1800*1650
PE-500*750	500*750	425	43-102	55	10.6	2270*2370*2145
PE-600*900	600*900	500	51-180	75	16.5	3000*2500*2600
PE-750*1060	750*1060	630	80-195	110	29	2526*2410*2780
PE-900*1200	900*1200	780	140-270	132	52	2960*2760*3530
PE-1000*1200	1000*1200	850	190-310	132	55	3889*2826*3025
PE-1200*1500	1200*1500	1020	260-510	180	100.9	4930*3548*3702
PEX-150*750	150*750	120	8.5-28	18.5	3.8	1300*1750*1200
PEX-200*750	250*750	210	15-35	22	5.5	1400*1750*1400
PEX-250*1000	250*1000	210	20-65	37	7	1400*1980*1440
PEX-250*1200	250*1200	210	20-75	45	8.5	1400*2180*1440
PEX-300*1300	300*1300	250	30-105	70	11	1560*2350*1600

Company Information

Victor is a large mineral processing manufacturer for 15 years history, with covering an area of 48,000 square meters and 20,000 square meters for workshop, with various large modernized machinery facilities, professional R&D team and installation team. 

With 32% market share in China and the rest to overseas, already successfully exported to over 50 countries, such as USA, England, Australia, Brazil, Turkey, Italy, Russia, South Africa, Zimbabwe, Sudan, Ghana, Congo, Morocco, India,Indonesia, Malaysia, Philippines, North Korea, Mongolia, Vietnam, Thailand etc.

Our goal is to provide one-stop service for you and assist you to solve all problems from investment to his return in the field of mining, including the preliminary mineral analysis, mineral processing test, engineering design, equipment debugging and technical training etc.. 
We are expert especially at mining separating and lab mining plant, main products as below:

Gold trommel wash plant
Shaking table
Spiral chute separator
Centrifugal gold concentrator
Jig separator machines
Waste recycling machine
Grinding and mill crusher
Flotation cell machine
Magnetic separator
Laboratory mining plant


Package: FCL & LCL export standard container 20GP/40GP/40HQ. 

FCL: main machinery gold shaking table in nude package and bulk in container, spare parts in wooden box or as your special requirement
LCL: machinery are packed in steel frame, base and deck are separately packed. 

Shipping: by sea shipment, by air shipment or by courier express, it depends on you.

Payment Terms: T/T or L/C is preferable. T/T: 30% deposit and the balance before delivery 

We will take photos for your products when finished and show you before delivery. Also keep you informed for any updated information including shipping before you receive it, to let you rest assured. 

Delivery time: shipped in 15 days after payment


FAQ

1.How is the quality of your products? (mining equipment/machine)
Answer: Our products are manufactured strictly according to national and international standard, and we will take a test on every grinder before delivery.

2.Guaranteed?
Answer: All of our products are guaranteed for one year. If products quality is not consistent with the description as we
described or the promise before you place order, we promise 100% refund.

3.How about price?
Answer: For the complete same machine, we can promise our quality is the best when the price same as other competitors, and our price can be lowest when the quality at standard level.

4.Service and Payment Terms?
Answer: We can accept T/T and L/C; 30% deposit, 70% balance before delivery, which is international trade practice;Finished product pictures will provide to customers before delivery.



Our Service

1) Pre-sale service: Freely provide project designing, process designing, choosing suitable equipment for you.

2) Medium-sales service: Accompany you to complete the acceptance of the equipment, draft the construction scheme and detailed process, and complete process of export

3) After-sales service: Offer considerate technical guidance in installation, debugging and operators training. We are available at any time if you need.