| Type: | Mechanical Agitating Tank |
|---|---|
| Motor Power: | 90W |
| Mining Object: | Ore |
| Motor Type: | AC Motor |
| Impeller Type: | Single Impeller |
| Certification: | CE, ISO |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier Laboratory Stirring Continuous Flotator
Introduction
FX mechanical stirring continuous flotation machine is mainly used for flotation of a small amount of ore samples in industrial experiments such as coal power, electric power, mining, geology, chemistry, metallurgy, building materials and chemical industry. Because it can form a series group and work continuously, it is more accurate and applicable than ordinary single cell flotation machine. It is often used in semi industrial production. Left feed configuration or right feed configuration is available upon request.
There are 2 types of configuration available, one is the electronic speed control with digital display, the other is with the frequency conversion which is a little more expensive.
Working Principle
FX Flotation Machine is a kind of impeller mechanical flotation machine which mainly consist of cells, the impeller system, mainshaft system and scarping divce.
1. To adjust the level of slurry in the cell and the thickness of the scraped froth layer, use wall plates of the two cells to make intermediary cell, install slurry level regulator, and mount orifice plate onto the cover in the cell to avoid negative effects on the froth zone exerted by the chaotic motion of slurry, as well as to avoid the gangue from being taken into the concentrate by the machine.
Lining plates are installed at the cell so that the bottom of the cell will not be abraded. The lining plate can be replaced. On the outside of the cell bottom is a discharge mouth, which is used to discharge water during its cleaning.
The slurry flows through the overflow mouth of wall panel into the intermediary cell and tail cell. It flows to the lower part of the intermediary cell and the duct covered by the lower part of the cell wall and then to the next cell. In this way, it can continue to flow through all the cells of flotation machine. It flows from the feed cell and is discharged from the discharge mouth of the tail cell. The front and back of the lower part of the cell is installed feeding mouth, to make it easy to change the process flow.
2. The impeller system is a disk impeller which is installed in the center of the cell in the flotation machine and whose blades are radially arranged. It is fixed onto the lower end of the impeller shaft and revolves around the vertical shaft pipe. The upper end of the pipe lies above the pulp stone and the froth layer while its lower end is supported on the cover. When the impeller rotates, a large amount of air can be sucked along the vertical pipe. Below the cover is fixed protective disk. The gap between the safety disk and the impeller depends on the amount of sucked air. It cannot be larger than 3mm at most. When the gap is too large, replace the abraded protective disc and make appropriate adjustment.
The holes in the vertical pipe are used to circulate slurry as well as mix the slurry and air. The rolling shaft installed inside the bearing shell above the impeller shaft rotates. The bearing shell is installed on the crossbeam and belt pulley is fixed on the top of the shaft which rotates through the V-belt when the motor is turned on. The tension of the V-belt is adjusted through the nuts.
3. Scraping device: The froth is scraped along the flotation machine through rotary scraper. The scraper is installed outside the discharge mouth of cell. At one end of the scraping shaft is installed belt pulley which rotates through the drive of worm reducer and V-belt.
Technical Parameters
|
Model
|
FX2-1.5
|
FX2-3
|
FX2-7
|
FX2-12
|
FX2-24
|
FX2-39
|
|
|
Cell Volume (L)
|
1.5
|
3
|
7
|
12
|
24
|
39
|
|
|
Cell Quantity
|
2
|
||||||
|
Impeller Diameter (mm)
|
Φ70
|
Φ110
|
Φ130
|
Φ170
|
Φ200
|
||
|
Impeller Speed (r/min)
|
1400
|
1332,1600,1836
|
1050-1320
|
680-1080
|
447-787
|
809
|
|
|
Scraper Speed (r/min)
|
33
|
20,30
|
20,30
|
24
|
12,16,20
|
13,21
|
|
|
Feeding Size (mm)
|
≤0.2
|
||||||
|
Power (W)
|
250
|
250
|
370
|
600
|
1100
|
1500
|
|
|
External
Size
|
Length (mm)
|
378
|
500
|
623
|
740
|
924
|
1081
|
|
Width (mm)
|
406
|
500
|
590
|
600
|
804
|
762
|
|
|
Height (mm)
|
523
|
600
|
750
|
700
|
925
|
930
|
|
|
Weight (kg)
|
25
|
40
|
55
|
85
|
260
|
280
|
|
Victor is a large mineral processing manufacturer for 15 years history, with covering an area of 48,000 square meters and 20,000 square meters for workshop, with various large modernized machinery facilities, professional R&D team and installation team.
With 32% market share in China and the rest to overseas, already successfully exported to over 50 countries, such as USA, England, Australia, Brazil, Turkey, Italy, Russia, South Africa, Zimbabwe, Sudan, Ghana, Congo, Morocco, India,Indonesia, Malaysia, Philippines, North Korea, Mongolia, Vietnam, Thailand etc.
Our goal is to provide one-stop service for you and assist you to solve all problems from investment to his return in the field of mining, including the preliminary mineral analysis, mineral processing test, engineering design, equipment debugging and technical training etc..
We are expert especially at mining separating and lab mining plant, main products as below:
Gold trommel wash plant
Shaking table
Spiral chute separator
Centrifugal gold concentrator
Jig separator machines
Waste recycling machine
Grinding and mill crusher
Flotation cell machine
Magnetic separator
Laboratory mining plant
Package: FCL & LCL export standard container 20GP/40GP/40HQ.
FCL: main machinery gold shaking table in nude package and bulk in container, spare parts in wooden box or as your special requirement
LCL: machinery are packed in steel frame, base and deck are separately packed.
Shipping: by sea shipment, by air shipment or by courier express, it depends on you.
Payment Terms: T/T or L/C is preferable. T/T: 30% deposit and the balance before delivery
We will take photos for your products when finished and show you before delivery. Also keep you informed for any updated information including shipping before you receive it, to let you rest assured.
Delivery time: shipped in 15 days after payment
FAQ
1.How is the quality of your products? (mining equipment/machine)
Answer: Our products are manufactured strictly according to national and international standard, and we will take a test on every grinder before delivery.
2.Guaranteed?
Answer: All of our products are guaranteed for one year. If products quality is not consistent with the description as we
described or the promise before you place order, we promise 100% refund.
3.How about price?
Answer: For the complete same machine, we can promise our quality is the best when the price same as other competitors, and our price can be lowest when the quality at standard level.
4.Service and Payment Terms?
Answer: We can accept T/T and L/C; 30% deposit, 70% balance before delivery, which is international trade practice;Finished product pictures will provide to customers before delivery.
Our Service
1) Pre-sale service: Freely provide project designing, process designing, choosing suitable equipment for you.
2) Medium-sales service: Accompany you to complete the acceptance of the equipment, draft the construction scheme and detailed process, and complete process of export
3) After-sales service: Offer considerate technical guidance in installation, debugging and operators training. We are available at any time if you need.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}