| Type: | Flotation Separator |
|---|---|
| Voltage: | 380V |
| Weight: | <1T |
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier 
1.large capacity;
2.low energy consumption;
3.Every cell owns three functions:air absorption,slurry absorption,and flotation separation,and the cells form a flotation separation loop by itself without any auxiliary equipment and is allocated horizontally,which favors the change of flow;
4.The circulation of mineral slurry is reasonable,and can avoid the disposition of coarse sand to the largest extent;
5.There is a self-control device on the surface of mineral slurry,so it is easy to adjust it.
Working Principle
Flotation Machine is usually a continuous process by a few tanks, dozens of tank flotation machine connection, including roughing, scavenging, concentration operations. The use of flotation machine should meet the following requirements about equipment and processes, varies parts are complete and intact. Machines function normally and achieve the required aeration rate. Motor drives impeller rotating through belt and pulley. On the one hand, the machine inhaled enough air mixed with slurry, on the other hand, stirring the mixture of pulp and pharmaceutical. At the same time, refinement of the bubble, the particles adhere to the bubbles on the role of reagents and float to the slurry surface.The impeller is rotated by the V-belt of motor and produces negative pressure by centrifugal function.Enough air is sucked to mix slurry,and slurry mixes drugs at the same time.Mineral sticks on the bubble completely and floats on the surface of slurry to form mineralized bubbles.The useful bubble is scraped out by adjusting flash board height and controlling the liquid surface.
|
Technical Parameter
|
|||||||
|
Model No
|
Effective Volume(m³)
|
Diameter of Impeller(mm)
|
Capacity
(m³/min)
|
Impeller Rotation(r/min)
|
Scrapper Rotation(r/min)
|
Power of Impeller(kw)
|
Power of Scrapper(kw)
|
|
XJK-0.13
|
0.13
|
200
|
0.05-0.16
|
600
|
17.5
|
1.5
|
0.55
|
|
XJK-0.23
|
0.23
|
250
|
0.12-0.28
|
500
|
17.5
|
1.5
|
0.55
|
|
XJK-0.35
|
0.35
|
300
|
0.15-0.5
|
470
|
17.5
|
2.2
|
0.55
|
|
XJK-0.62
|
0.62
|
350
|
0.3-0.9
|
400
|
16
|
3
|
1.1
|
|
XJK-1.1
|
1.1
|
500
|
0.6-1.6
|
330
|
26
|
5.5
|
1.1
|
|
XJK-2.8
|
2.8
|
600
|
1.5-3.5
|
280
|
26
|
11
|
1.1
|
Victor is a large mineral processing manufacturer for 15 years history, with covering an area of 48,000 square meters and 20,000 square meters for workshop, with various large modernized machinery facilities, professional R&D team and installation team.
With 32% market share in China and the rest to overseas, already successfully exported to over 50 countries, such as USA, England, Australia, Brazil, Turkey, Italy, Russia, South Africa, Zimbabwe, Sudan, Ghana, Congo, Morocco, India,Indonesia, Malaysia, Philippines, North Korea, Mongolia, Vietnam, Thailand etc.
Our goal is to provide one-stop service for you and assist you to solve all problems from investment to his return in the field of mining, including the preliminary mineral analysis, mineral processing test, engineering design, equipment debugging and technical training etc..
We are expert especially at mining separating and lab mining plant, main products as below:
Gold trommel wash plant
Shaking table
Spiral chute separator
Centrifugal gold concentrator
Jig separator machines
Waste recycling machine
Grinding and mill crusher
Flotation cell machine
Magnetic separator
Laboratory mining plant
Package: FCL & LCL export standard container 20GP/40GP/40HQ.
FCL: main machinery gold shaking table in nude package and bulk in container, spare parts in wooden box or as your special requirement
LCL: machinery are packed in steel frame, base and deck are separately packed.
Shipping: by sea shipment, by air shipment or by courier express, it depends on you.
Payment Terms: T/T or L/C is preferable. T/T: 30% deposit and the balance before delivery
We will take photos for your products when finished and show you before delivery. Also keep you informed for any updated information including shipping before you receive it, to let you rest assured.
Delivery time: shipped in 15 days after payment
FAQ
1.How is the quality of your products? (mining equipment/machine)
Answer: Our products are manufactured strictly according to national and international standard, and we will take a test on every grinder before delivery.
2.Guaranteed?
Answer: All of our products are guaranteed for one year. If products quality is not consistent with the description as we
described or the promise before you place order, we promise 100% refund.
3.How about price?
Answer: For the complete same machine, we can promise our quality is the best when the price same as other competitors, and our price can be lowest when the quality at standard level.
4.Service and Payment Terms?
Answer: We can accept T/T and L/C; 30% deposit, 70% balance before delivery, which is international trade practice;Finished product pictures will provide to customers before delivery.
Our Service
1) Pre-sale service: Freely provide project designing, process designing, choosing suitable equipment for you.
2) Medium-sales service: Accompany you to complete the acceptance of the equipment, draft the construction scheme and detailed process, and complete process of export
3) After-sales service: Offer considerate technical guidance in installation, debugging and operators training. We are available at any time if you need.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}